As a new type of heating method, electric floor heating has many users all over the world. Some potential customers who are still waiting are very worried about the excessive electricity consumption for electric floor heating.
In fact, the electricity cost of electric floor heating is related to many objective and subjective factors. For example, the insulation performance of the building itself, the actual installed wattage, and some habits of using electric floor heating will affect the actual electricity cost during heating.
Excluding some objective factors, if someone feels that the electric floor heating at home is very power-consuming, then there must be misunderstandings in the operation and use. As long as the correct electric floor heating energy-saving method is mastered, the problem of excessive electricity consumption can be easily solved.
If you are not in the room for a short time, choose to lower the temperature instead of turning off the system.
Electric floor heating has a temperature rise process, and during the startup process, the power is larger and the electricity bill is higher.
Therefore, it is recommended to lower the temperature of rooms that are not often used by a few degrees instead of completely turning it off. Only when you are not living in or leaving for a long time can you choose to turn off the system.
Do not set the temperature very low at once, and gradually increase the temperature.
Electric floor heating uses low-temperature radiation to provide heating, and it takes a process for the temperature to rise, so especially when it is turned on, it is recommended to set the temperature lower and slowly increase the temperature. You can also install an intelligent temperature controller, which can intelligently adjust the temperature controller according to your needs to achieve the most comfortable temperature;
It is recommended to set the temperature lower when it is just turned on, and then gradually increase it to the required temperature, or use an intelligent thermostat, which can set the temperature according to needs.
Use the thermostat correctly.
The correct use of the temperature control system is also a very important factor in the energy-saving operation of the floor heating system. The electric floor heating thermostat should comply with relevant regulations when using it, and do not affect the heating effect of the floor heating system due to incorrect use.
Try not to open windows and doors frequently.
There should be no obvious gaps in the doors and windows of electric floor heating. It is best to use double-layer hollow windows, and then do a good job of wall insulation to minimize heat loss.
Post time: Nov-04-2024
