Principle of use of installing heating cable heating system: Heating cable heating uses electricity as energy and uses alloy resistance wire for power-on heating. The heating cable is installed under the ground to emit heat and warm the entire room in a low-temperature radiation manner to achieve the effect of heating or insulation.
Low-temperature radiation heating cable heating must be used in residential buildings where the building energy conservation meets the national and local comprehensive energy conservation standards of 65%. Now, more and more users are beginning to use heating cable heating systems.
Heating cable heating can be used in different fields, such as household electric floor heating, livestock breeding electric heating, soil heating, etc. Among them, household installing heating cable heating system is the most common. Let’s take bedroom heating as an example. What aspects should we pay attention to when heating?
Bedroom installing heating cable heating system:
Because furniture and beds occupy the main position in the bedroom, considering the heat dissipation of heating cable heating, it is recommended to choose a bed with legs so that some heat will not be dissipated in time and concentrated in a certain area.
When choosing wooden floors, you need to choose a regular flooring supplier. It is best to choose a floor dedicated to the heating cable heating system, which is safe and reliable. At the same time, do not ignore the role of edge insulation materials.
The temperature requirement for installing heating cable heating system does not need to be too high, generally maintained at 18-22 degrees. Therefore, in terms of power selection, depending on the location, it is generally configured at around 120-150W/㎡. In addition, the spacing under the bed can be increased.
In terms of temperature setting, the temperature can be reasonably set according to the use function of each room. The temperature does not need to be set too high, generally set at around 20℃.
Heating cable heating uses a thermostat to adjust, and can also achieve intelligent control. It can automatically adjust the room temperature according to the changes in time and the owner’s behavior habits to achieve energy-saving effects.
Installing heating cable heating system is divided into two installation methods: wet and dry. Families are recommended to choose wet installation, which has a heat storage layer and good warming effect.
Post time: Nov-06-2024
