Parallel constant power silicone heating cable wire defrost drain pipe heating wire belt thawing anti-icing 25W per meter

Short Description:

The heating wire is 100 meters long per roll, 7mm and 4mm wide, 5mm thick, 220V 25W/m 30W/m 40W/m. The price is per meter. The length can be cut at will. The longest length is 50 meters and the shortest length is 1 meter;

Withstand voltage: 3500V Insulation: ≥200mn;

How to use: First peel off one end of the heating wire. There are 2 wires inside. Connect directly to the 220V power supply. Wrap the other end with heat shrink tube or electrical tape. Do not connect the two wires;

Application scope: buildings, pipelines, refrigerated doors and warehouse floor heating, ramp heating, eaves and roof defrosting.

 

 

 

 


  • FOB Price: US $0.5 - 9,999 / Piece
  • Min.Order Quantity: 100 Piece/Pieces
  • Supply Ability: 10000 Piece/Pieces per Month
  • Product Detail

    Product Tags

    Product features:
    Good temperature resistance, the whole adopts silicone rubber as insulation material (including power cord), and the working environment temperature is -60° to 200 degrees
    Good thermal conductivity: it can generate heat energy through, directly conducting heat, has high thermal efficiency, and can achieve the effect quickly. 
    Reliable electrical performance: each heating belt is strictly tested for DC resistance, water immersion high voltage, and insulation resistance before leaving the factory to ensure quality
    Sturdy structure: high flexibility, easy to bend, combined with the overall cold tail section, no joint point, reasonable structure, easy to install.
    Strong designability, heating length, lead length, rated voltage, and power are determined by the user
     
    Product structure:
    The heating wire conductor is two tinned copper wires with a cross-section of 0.752 
    The isolation layer is made of silicone rubber by extrusion 
    The high-strength alloy wire spiral and the silicone rubber surface become the heating core 
    The sealing layer is made by extrusion
     

    q1
    q3
    q2
    q4







  • Previous:
  • Next:

  • Write your message here and send it to us